Processing machinery parts, machinery processing plant to develop machinery parts processing technology, to ensure that each link is normal. In the machining of machine parts, grinding is used to produce and process various metal materials, can produce processing plane, inside and outside cylindrical surface and conical surface.

The entire grinding process involves a complex combination of physics and chemistry, including microscopic analysis and drilling of the steel by means of inorganic acid abrasive particles. Because the raw material of the grinding tool is softer than the raw material of the grinding steel, the abrasive particles in the abrasive are placed on the surface of the grinding tool or fluctuate to form a multi-edge matrix. When grinding tools and steel parts for fitness exercise, the surface of the steel parts under the necessary working pressure for microscopic analysis of drilling.

When chromium oxide, polyether or other abrades are used, the surface of steel parts will produce layers of extremely thin air oxide film, which is easy to be worn off. In the mechanical processing plant, the air oxide film is produced rapidly throughout the grinding process and is continuously worn off by the plant, thus speeding up the whole grinding process and reducing the roughness.

The passivated abrasive particles squeeze the surface of the steel and deform the raw material to be processed. The peaks and troughs of the steel surface tend to flatten out during the cold work hardening process of plastic deformation or continuous deformation, and small cutting occurs when the steel is broken.

In the process of machining workpiece by mechanical parts, the sensor technology is used to identify the working procedure, that is, to identify whether the working procedure is the required working procedure of parts (components). Identify whether the workpiece or blank sent to the machine to be processed is the workpiece or blank to be processed; It is also required to identify whether the posture of the workpiece installation is the posture required by the process specification.

In addition, machining plant job identification and job installation monitoring can also be used to detect machining allowance and surface defects of blank or workpiece to be machined. The important point of sensor technology in machining machine parts is to reduce the accident rate. Now, tool sensors on machine tools can effectively prevent such events from happening.